|
|
|
|
|
|
| |
PRODUCT DETAILS:
Defi-Link Meters are electronic gauges which are high response and refined design.
Defi-Link Meters need to be connected to Defi-Link Control Unit II. Up to 7 gauges can be connected and controlled by one Control Unit II. The name of the connection system is "Defi-Link System."
Defi-Link System allows gauges to be attached to Defi-Link Control Unit II with a single "DAISY CHAIN" wiring system.
Each gauge has two LEDs. One LED illuminates when the gauge pointer exceeds a warning value which is discretionary with the Control Unit II. The other LED illuminates when the gauge pointer exceeds a past maximum value.
Gorgeous Opening mode:
During the opening mode, wire disconnections, short circuits, and serial errors are checked automatically. When errors are found, LEDs light up in order.
Full-lineup: boost(for turbocharged and supercharged engines), intake manifold pressure(for natural aspirated engine), oil pressure, water temperature, oil temperature, fuel pressure, exhaust gas temperature and tachometer. White and black gauge dials are available.
A bright transparent green gauge dial and a red instrument needle pointer are used in the gauges to increase visibility at night and in low-light conditions.
The scale of 4 1/2" gauges and 3 1/8" gauges is compressed to acquire great visibility and ease of use.
*Wide-angle scale is used at the idling range 0~1,000RPM.
*The scale is fitted to recent engine power band and linear scale is used from 3,000RPM to 11,000RPM
Regular Position Bezel is attached to 52mm(2 1/16") and 60mm(2 3/8") gauges. The bezel enable user to find a subtle change in car by setting the position of the red triangle depending on the driving situation. The bezel is removable.
Driving data can be stored and can be replayed up to 3 minutes.
Double Warning function by a meter's LED lamp and a beep.
If Defi-Link Indicator(sold separately) is connected, it blinks when any of connected meters' warning LED lights.
Defi-Link Indicator can be connected with each meter.
(Defi-Link Indicator is standard option for 4 1/2" and 3 1/8" Defi-Link Meters.)
Differential pressure between fuel pressure and turbo can be shown if both of fuel pressure meter and turbo meter are installed.
Defi-Link Control Unit II is necessary to operate Defi-Link Meter.
Defi-Link Meters are applicable to 12V vehicles only
|
INSTALLATION MANUALS:
SEARCH FOR SIMILAR PRODUCTS:
See all Defi Defi-Link Meter
See all Defi Gauges
-> See all Defi Gauges/Accessories
-> See all Defi Interior
See all Gauges
-> See all Gauges/Accessories
-> See all Interior
|
| |
|
|