Lowering your vehicle with a lowering spring or coilover set alters the geometry of the suspension. This can cause tire damaging negative camber (wheels tucked at the top). The tire rides on the inside edge causing uneven tire wear and handling due to uneven contact with the ground. Progress Alignment Kits are designed to eliminate or significantly reduce negative camber present in lowered vehicles restoring optimal tire wear, handling, and tire life. Progress manufactures these kits in three different styles to suit a large number of vehicle suspensions:

Pivot Mount Type: The pivot type camber kits feature new billet steel pivot mounts to relocate the upper control arms further outboard. This moves the top of the tire out for additional positive camber. Polyurethane bushings improve cornering and drag launch. These kits includes Teflon grease, thread locker, and all necessary hardware.

Ball Joint Type: These kits provide new adjustable upper ball joints using offset mounting studs. By rotating the new ball joints, positive or negative adjustments are possible. And caster changes can also be made. A favorite for autocrossers, because street and racing settings are easy to make.

Offset Bushing Type: These kits include new polyurethane bushings while offset steel inserts replace the rubber upper control arm bushings. Rotating the steel inserts moves the control arms for camber adjustment.

Don't wait until you need to replace those expensive tires. Pick-up a Progress Alignment Kit with your suspension system today and get the most from yout treads!